Prosthetics

Lower extremity prosthetics

Suspension

The 6A53 sliding adapter permits the distal components of the modular prosthesis to be shifted in parallel, regardless of the angle adjustment by the pyramids. The adjustments can be made either in the frontal plane – medial or lateral – or in the sagittal plane – anterior or posterior.

The MagnoFlex Lock secures the liner in the prosthetic socket and is suitable for transfemoral and transtibial prostheses. The 6Y13=F1 pin is included with this shuttle lock.
All common liners with a distal connector can be used.

The Dynamic Vacuum System for transtibial prostheses offers a comfortably firm hold, convenient volume management and good perception of the ground. A magnetic coupling between the liner and piston generates a permanent vacuum after just a few steps.
Can be combined with the following liners: 6Y94=*, 6Y400, 6Y700.

The Harmony P4 modular is a completely modular installation version of the Harmony P4 pump. Thanks to novel double-stroke technology, the required vacuum is reached after just a few steps.

The mechanical vacuum pump generates an active vacuum and increases the negative pressure in the prosthetic socket. In combination with an integrated elastomer rod, it dampens vertical impact loads and permits slight torsion of the socket.

Active vacuum for transtibial prostheses.

The Harmony E2 is an electronic pump for the Harmony system. It provides volume management on the residual limb, enhanced prosthetic suspension and reduced forces in the socket.

The slim pump weighs only 399 grams and has a low system height. This allows more users to benefit from the advantages of the Harmony system’s vacuum solution.

The 4R140 outlet valve is a check valve intended for fabricating vacuum socket systems. It is integrated directly into the socket and is suitable exclusively for transtibial prostheses.
All common liners without a distal connector can be used.

The ProFlex is an anatomically shaped sealing sleeve made of a hard-wearing copolymer (TPE) with textile cover.
It is used as the primary means of suspension or for sealing a vacuum system.

The Derma Protection is a cylindrically shaped sealing sleeve made of a hard-wearing copolymer (TPE) with textile cover. It is used as the primary means of suspension or for sealing a vacuum system.

The ClickValve has a multi-option safety shackle that prevents loss of the upper valve part. The considerably reduced height and the outside diameter along with the unusual design ensure good cosmetic processing in the socket.
The valve is compatible with all common liners without a distal connector and can also be used without a liner.

Product type	Double and sliding adapters
Mobility grade
Max. body weight	125 kg

Product type	Shuttle locks
Max. body weight	125 kg
Amputation level	Transtibial amputation (TT), Transfemoral amputation (TF)

Product type	Pumps
Mobility grade	2, 3, 4
Amputation level	Transtibial amputation

Product type	Pumps
Mobility grade	2, 3, 4
Max. body weight	150 kg

Product type	Pumps
Mobility grade	2, 3, 4
Max. body weight	100 kg

Suspension

Sliding Adapter P/P

MagnoFlex lock

Dynamic Vacuum System pump

Harmony P4 modular

Harmony P4 HD

Harmony P4

Harmony E2

Harmony P3

One-way valve

ProFlex sealing sleeve, short

Derma Protection sealing sleeve

Click Valve

Product type	Valves
Mobility grade	1, 2, 3, 4
Max. body weight	No limit

Product type	Valve
Mobility grade	1, 2, 3, 4
Max. body weight	No limit