5Z16 - Lamination Technology
Frame preform
Efficient reinforcement for prosthetic sockets
Preforms represent a new generation in transfemoral socket fabrication.
Preforms represent a new generation in transfemoral socket fabrication.
Highly rigid frame and container sockets can be produced with little effort by using precut carbon elements.
| Material | Carbon |
| Colour | Black |
| Contents | 1 Piece(s) |
| Order unit | Set |
| Amputation level | Transfemoral amputation |
| Product type | Reinforcement materials |
Functionality
All benefits at a glance
Clean and easy processing
Pre-determined layer structure
Simplified fabrication and less time to fabricate a socket
Waste of expensive reinforcement materials is minimised
Simplified quantity control in comparison to rolled and sheet goods
Processing instructions
- Apply the M/L section with the short side oriented medially. Round the edges when shortening to the correct length.
- Wrap around the radial section: position the reinforcement triangle medially in the perineum with the point towards the end of the residual limb. The radial section can be used for left-hand (carbon on the outside) and right-hand (carbon on the inside) sockets. Perform the first casting with the M/L section and the radial section.
- Attach the anchor and position the faces of the star so they are centred over the anchor arms. Perform the second casting with the anchor and star.
The carbon preforms can be processed with all Ottobock resins.
Specifications
Product information
| Material | Carbon |
| Colour | Black |
| Contents | 1 Piece(s) |
| Order unit | Set |
| Amputation level | Transfemoral amputation |
| Product type | Reinforcement materials |
Product Data
| Article number | Description | Dimension A | Dimension B | Dimension C | Package contents | Quantity unit |
|---|---|---|---|---|---|---|
| 5Z16=280X700X150 | Frame preform | 280 mm | 370 mm | 700 mm | Three preforms for fabricating a prosthetic socket | Set |
| 5Z16=350X700X150 | Frame preform | 350 mm | 500 mm | 700 mm | Three preforms for fabricating a prosthetic socket | Set |
| 5Z17=280X700X150 | Container preform | 280 mm | 370 mm | 700 mm | Three preforms for fabricating a prosthetic socket | Set |
| 5Z17=350X700X150 | Container preform | 350 mm | 500 mm | 700 mm | Three preforms for fabricating a prosthetic socket | Set |